richonguzman/LoRa_APRS_Tracker
LoRa APRS Tracker with Tx and Rx capabilities, Messages, Wx, Winlink and more...
22 Releases
Latest: 2mo ago
V2.4.3.2 F4HOF BT Classic Update , new build and bugsV2.4.3.2Latest
V2.4.3.2 F4HOF BT Classic Update , new build and bugs
V2.4.3.1 Libraries update and Lilygo T3S3 with GPS addV2.4.3.1
V2.4.3.1 Libraries update and Lilygo T3S3 with GPS add
V2.4.3 Add T-Beam 1WV2.4.3
V2.4.3 Add T-Beam 1W
V2.4.2 More DisplayEcoModeFixV2.4.2
V2.4.2 More DisplayEcoModeFix now it works as intended ;)
V2.4.1 DisplayEcoMode FixV2.4.1
V2.4.1 DisplayEcoMode Fix
V2.4 Status and BLE updatesV2.4
📋 Changes
- Status mod: User defined Status for each Profile (No more hardcoded Status)
- BLE Packets buffer enabled for more than one packet in each BLE packet.
- BLE Packets from Android Phone App Fix (thanks SQ2CPA)
- APRSPacketLib V1.0.4 and other libraries update
- New symbol added (WheelChair)
V2.3 New Battery Monitor and TelemetryV2.3
📋 Changes
- Wx Telemetry replaced by Traditional Telemetry on Trackers as moving stations won't Tx exact Wx Packets.
- New Battery Monitor for all Boards based on the Heltec Update Boards by Tilen S54B.
- Personal Note for each Beacon/Callsing visible in Screen. Thanks Tilen S54B
- APRSPacketLib updated to V1.0.0
- Added RPC Electronics 1W LoRa GPS with 1W SX1268 board.
- Fixed Keyboard not being recognized on T-Deck at boot on some boards
V2.2.4
📋 Changes
- New DIY board from F4GOH: ESP32 + E220 Byte 400M30S LLCC68 + GPS added.
- APRSPacketLib library update
- Many TFT Screens update for Heltec Wireless Tracker and T-Deck
V2.2.3
📋 Changes
- New DIY board from F4GOH: ESP32 + E22 Byte 400M30S (433MHz) + GPS added.
- New Screen Brightness Configuration in Menu>Configuration>Display.
V2.2.2
📋 Changes
- new Try to fix BLE crashing on ESP32S3 based boards when going into deep sleep
V2.2.1
📋 Changes
- BLE crashing fix when boards are put to sleep from V2.2
V2.2
📋 Changes
- Bluetooth connections lets you decide to use BLE/BT Classic and KISS/TNC
- Send GPS position to a referred e-mail.
- New Symbols for Oled/TFT Screen
- New Reports for Wx Weather, Hospital QTH, Police QTH, Fire Station QTH
- QRP LightTrackerPlus Battery Fix
V2.1.4
📋 Changes
- "new version " of HELTEC V3 (V3.2) Support Added for GPS (DIY) and TNC
- QRP LightTracker Battery fix
V2.1.3
📋 Changes
- Altitude fix in APRSPacketLib to always send it no matter if not moving for 15 min or more (example: SOTA activations)
- TROY_LoRa_APRS board added
V2.1.2
📋 Changes
- T-DECK DIY/GPS TFT screen fix
- Buttons added for DIY Boards and boards without buttons
V2.1.1
Small Fix for TFT Screens to return to good behavior of Display Eco Mode
V2.1
📋 Changes
- T-deck big update
- APRSPacketLib added
- many many minor fix and mods
V2.0.3
📋 Changes
- Added QRP Labs LightTracker Plus1.0 support.
- Preparing for Variants usage (platformio.ini cleaning).
V2.0.2
📋 Changes
- Added Lilygo TTGO T-Deck Plus support. (T-Deck Plus has internal GPS which is usually not ready for NMEA packets, If GPS does not work check Wiki for GPS firmware mod)
- change to 2 minutes the WiFiAP timeout.
V2.0.1
📋 Changes
- WiFiAP for Tracker WebUI Configuration stops after 1 minute of no-client connected to it (To avoid pressing "Save" on WebUI if you have no way to really entering the WiFiAP/WebUI).
- Telemetry initial packets now gets displayed on Screen to avoid only showing "frozen" screen during tracker boot up with Encoded Telemetry = true;
V2.0
This is first Web Installer / Flasher for LoRa APRS Tracker. Will start with V2.0 as V1.0 would be just the VSCODE installer. So V2.0 is now alive for Web Installer Purposes. CA2RXU Enjoy.
V0.9.8
📋 Changes
- Alpha Release with minor fixes
